Bibo 3D Printer Dual Extruder Laser Engraving Sturdy Frame Touch Laser X Glass. This printer is moderately used, there is a crack in the plexiglass door though I'm certain the company would send a replacement for little to no cost if you inquire about it, as they do with all their parts.If not, contact me and I'll see about replacing it. The crack has not been an issue for me personally, its more of an aesthetic thing.
The printer is somewhat modified, as I switched out the cheap plastic extruder with a machined aluminum one and the wearing brass feeding gears with steel ones. When I initially received the printer the e-steps were off, creating odd effects on my prints, though calibration has fixed that since. There is no damage to the actual printer hardware or software, besides the crack in the door.
I'll also include some 3D printed parts (made on this printer) that I made in order to make the use of it more convenient, namely a grommet (basically a piece to fill empty space) that makes the USB and SD ports nicer to use, as well as feet for the printer. As the frame is aluminum, sliding the printer on some surfaces may cause damage or other abrasions, and the 3D printed feet help to prevent that. Furthermore I'll include the parts I had bought for maintenance purposes replacement thermistors, nuts. 4mm brass nozzles, belt tensioners, etc.
And the original parts that I had switched out. For details on this model of printer you can check the Amazon listing, but the basics will be provided below: Build size - 22.214.171.124 inches / 214186160 mm Minimum printing resolution - 0.05 mm. Max nozzle temp - 270 C Filament diameter - 1.75mm. I personally recommend using the Cura slicer for this printer, and I can provide the profiles I wrote for this printer should you decide to use that one.I also recommend using a gluestick on the glass bed to improve first layer adhesion. As with all glass beds, it is generally a good idea to add something to help with adhesion, the other popular choices (which I have not tested personally) are painters tape and hairspray. This item is in the category "Computers/Tablets & Networking\3D Printers & Supplies\3D Printers". The seller is "iridium062" and is located in this country: US. This item can be shipped to United States.